目录

• 一、前言
• 二、CAM
• • • • 1. CAM计算过程
      • 2. 代码实现
      • 3. 流程图
• 三、SAM
• • • • 1. SAM计算过程
      • 2. 代码实现
      • 3. 流程图
• 四、YOLOv5中添加CBAM模块
• 参考文章

一、前言

  由于卷积操作通过融合通道和空间信息来提取特征（通过N×NN×NN×N的卷积核与原特征图相乘，融合空间信息；通过不同通道的特征图加权求和，融合通道信息），论文提出的Convolutional Block Attention Module（CBAM）沿两个独立的维度（通道和空间）依次学习特征，然后与学习后的特征图与输入特征图相乘，进行自适应特征细化。

  上图可以看到，CBAM包含CAM（Channel Attention Module）和SAM（Spartial Attention Module）两个子模块，分别进行通道和空间上的Attention。这样不只能够节约参数和计算力，并且保证了其能够做为即插即用的模块集成到现有的网络架构中去。

二、CAM

1. CAM计算过程

  输入特征图FFF首先经过两个并行的MaxPool层和AvgPool层，将特征图的维度从C×H×WC×H×WC×H×W变为C×1×1C×1×1C×1×1，然后经过Shared MLP模块。在该模块中，它先将通道数压缩为原来的1/r1/r1/r倍，再经过ReLU激活函数，然后扩张到原通道数。将这两个输出结果进行逐元素相加，再通过一个sigmoid激活函数得到Channel Attention的输出结果，然后将这个输出结果与原图相乘，变回C×H×WC×H×WC×H×W的大小。

  上述过程的计算公式如下：

Mc(F)=σ(MLP(AvgPool(F))+MLP(MaxPool(F)))M_{c}(F)=\sigma (MLP(AvgPool(F))+MLP(MaxPool(F)))Mc​(F)=σ(MLP(AvgPool(F))+MLP(MaxPool(F)))
=σ(W1(W0(Favgc))+W1(W0(Fmaxc)))=\sigma (W_{1}(W_{0}(F^{c}_{avg}))+W_{1}(W_{0}(F^{c}_{max})))=σ(W1​(W0​(Favgc​))+W1​(W0​(Fmaxc​)))

  其中，σ\sigmaσ代表sigmoid激活函数，W0∈RC/r×CW_{0}\in R^{C/r\times C}W0​∈RC/r×C，W1∈RC×C/rW_{1}\in R^{C\times C/r}W1​∈RC×C/r，且MLP的权重W0W_{0}W0​和W1W_{1}W1​对于输入来说是共享的，ReLU激活函数位于W0W_{0}W0​之后，W1W_{1}W1​之前。

2. 代码实现

class ChannelAttention(nn.Module):def __init__(self, in_planes, ratio=16):super(ChannelAttention, self).__init__()self.avg_pool = nn.AdaptiveAvgPool2d(1)self.max_pool = nn.AdaptiveMaxPool2d(1)self.f1 = nn.Conv2d(in_planes, in_planes // ratio, 1, bias=False) # 上面公式中的W0self.relu = nn.ReLU()self.f2 = nn.Conv2d(in_planes // ratio, in_planes, 1, bias=False) # 上面公式中的W1self.sigmoid = nn.Sigmoid()def forward(self, x):avg_out = self.f2(self.relu(self.f1(self.avg_pool(x))))max_out = self.f2(self.relu(self.f1(self.max_pool(x))))out = self.sigmoid(avg_out + max_out)return torch.mul(x, out)

3. 流程图

  CAM过程的详细流程如下图所示：

三、SAM

1. SAM计算过程

  将Channel Attention的输出结果通过最大池化和平均池化得到两个1×H×W1×H×W1×H×W的特征图，然后经过Concat操作对两个特征图进行拼接，再通过7×77×77×7卷积将特征图的通道数变为111（实验证明7×77×77×7效果比3×33×33×3好），再经过一个sigmoid得到Spatial Attention的特征图，最后将输出结果与原输入特征图相乘，变回CHW大小。

  上述过程的计算公式如下：

Ms(F)=σ(f7×7([AvgPool(F);MaxPool(F)]))M_{s}(F)=\sigma (f^{7\times 7}([AvgPool(F);MaxPool(F)])) Ms​(F)=σ(f7×7([AvgPool(F);MaxPool(F)]))

=σ(f7×7([Favgs;Fmaxs]))=\sigma (f^{7\times 7}([F^{s}_{avg};F^{s}_{max}]))=σ(f7×7([Favgs​;Fmaxs​]))

  其中，σ\sigmaσ代表sigmoid激活函数，f7×7f^{7\times 7}f7×7代表卷积核大小为7×77×77×7的卷积过程。

2. 代码实现

class SpatialAttention(nn.Module):def __init__(self, kernel_size=7):super(SpatialAttention, self).__init__()assert kernel_size in (3, 7), 'kernel size must be 3 or 7'padding = 3 if kernel_size == 7 else 1self.conv = nn.Conv2d(2, 1, kernel_size, padding=padding, bias=False)self.sigmoid = nn.Sigmoid()def forward(self, x):avg_out = torch.mean(x, dim=1, keepdim=True)max_out, _ = torch.max(x, dim=1, keepdim=True)out = torch.cat([avg_out, max_out], dim=1)out = self.sigmoid(self.conv(out))return torch.mul(x, out)

3. 流程图

  SAM过程的详细流程如下图所示：

四、YOLOv5中添加CBAM模块

• 修改common.py
  在common.py中添加下列代码：

class ChannelAttention(nn.Module):def __init__(self, in_planes, ratio=16):super(ChannelAttention, self).__init__()self.avg_pool = nn.AdaptiveAvgPool2d(1)self.max_pool = nn.AdaptiveMaxPool2d(1)self.f1 = nn.Conv2d(in_planes, in_planes // ratio, 1, bias=False)self.relu = nn.ReLU()self.f2 = nn.Conv2d(in_planes // ratio, in_planes, 1, bias=False)self.sigmoid = nn.Sigmoid()def forward(self, x):avg_out = self.f2(self.relu(self.f1(self.avg_pool(x))))max_out = self.f2(self.relu(self.f1(self.max_pool(x))))out = self.sigmoid(avg_out + max_out)return torch.mul(x, out)class SpatialAttention(nn.Module):def __init__(self, kernel_size=7):super(SpatialAttention, self).__init__()assert kernel_size in (3, 7), 'kernel size must be 3 or 7'padding = 3 if kernel_size == 7 else 1self.conv = nn.Conv2d(2, 1, kernel_size, padding=padding, bias=False)self.sigmoid = nn.Sigmoid()def forward(self, x):avg_out = torch.mean(x, dim=1, keepdim=True)max_out, _ = torch.max(x, dim=1, keepdim=True)out = torch.cat([avg_out, max_out], dim=1)out = self.sigmoid(self.conv(out))return torch.mul(x, out)class CBAMC3(nn.Module):# CSP Bottleneck with 3 convolutionsdef __init__(self, c1, c2, n=1, shortcut=True, g=1, e=0.5):  # ch_in, ch_out, number, shortcut, groups, expansionsuper(CBAMC3, self).__init__()c_ = int(c2 * e)  # hidden channelsself.cv1 = Conv(c1, c_, 1, 1)self.cv2 = Conv(c1, c_, 1, 1)self.cv3 = Conv(2 * c_, c2, 1)self.m = nn.Sequential(*[Bottleneck(c_, c_, shortcut, g, e=1.0) for _ in range(n)])self.channel_attention = ChannelAttention(c2, 16)self.spatial_attention = SpatialAttention(7)def forward(self, x):# 将最后的标准卷积模块改为了注意力机制提取特征return self.spatial_attention(self.channel_attention(self.cv3(torch.cat((self.m(self.cv1(x)), self.cv2(x)), dim=1))))

• 修改yolo.py
  在yolo.py的if m in [Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, DWConv, MixConv2d, Focus, CrossConv, BottleneckCSP, C3, C3TR,......]中添加CBAMC3，即修改后的代码为：

        if m in [Conv, GhostConv, Bottleneck, GhostBottleneck, SPP, DWConv, MixConv2d, Focus, CrossConv, BottleneckCSP,C3, C3TR, ASPP, CBAMC3]:c1, c2 = ch[f], args[0]  if c2 != no:  c2 = make_divisible(c2 * gw, 8)  args = [c1, c2, *args[1:]] 

• 修改yolov5s.yaml
  修改后的yolov5s.yaml如下：

# YOLOv5 🚀 by Ultralytics, GPL-3.0 license# Parameters
nc: 80  # number of classes
depth_multiple: 0.33  # model depth multiple
width_multiple: 0.50  # layer channel multiple
anchors:- [10,13, 16,30, 33,23]  # P3/8- [30,61, 62,45, 59,119]  # P4/16- [116,90, 156,198, 373,326]  # P5/32# YOLOv5 v6.0 backbone
backbone:# [from, number, module, args][[-1, 1, Conv, [64, 6, 2, 2]],  # 0-P1/2[-1, 1, Conv, [128, 3, 2]],  # 1-P2/4[-1, 3, CBAMC3, [128]],[-1, 1, Conv, [256, 3, 2]],  # 3-P3/8[-1, 6, CBAMC3, [256]],[-1, 1, Conv, [512, 3, 2]],  # 5-P4/16[-1, 9, CBAMC3, [512]],[-1, 1, Conv, [1024, 3, 2]],  # 7-P5/32[-1, 3, CBAMC3, [1024]],[-1, 1, SPPF, [1024, 5]],  # 9]# YOLOv5 v6.0 head
head:[[-1, 1, Conv, [512, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 6], 1, Concat, [1]],  # cat backbone P4[-1, 3, C3, [512, False]],  # 13[-1, 1, Conv, [256, 1, 1]],[-1, 1, nn.Upsample, [None, 2, 'nearest']],[[-1, 4], 1, Concat, [1]],  # cat backbone P3[-1, 3, C3, [256, False]],  # 17 (P3/8-small)[-1, 1, Conv, [256, 3, 2]],[[-1, 14], 1, Concat, [1]],  # cat head P4[-1, 3, C3, [512, False]],  # 20 (P4/16-medium)[-1, 1, Conv, [512, 3, 2]],[[-1, 10], 1, Concat, [1]],  # cat head P5[-1, 3, C3, [1024, False]],  # 23 (P5/32-large)[[17, 20, 23], 1, Detect, [nc, anchors]],  # Detect(P3, P4, P5)]

参考文章

CBAM——即插即用的注意力模块（附代码）